Humi-Temp

96×96

4 Digit – Dual Row
Humidity Controller

`Description`		`Humi-Temp`
Display	Height & Colour	0.80'' White & 0.56'' Green
	No. of Digits	4 Digits Dual Row
	LED Indication	Dry Heater, Wet Heater, Compressor, AL1, AL2, LWL
`Input Specification`
Measurement	Temperature Input	RTD : Pt-100 Analog : 0-20mA, 4-20mA, 0-1 VDC
	Humidity Input	Analog : 0-20mA, 4-20mA, 0-1 VDC, 0-3.3 VDC, 0-5 VDC, 0-10 VDC, RH-20, RH-35
	Resolution	Pt-100: 1°C/ 0.1°C Analog: 1°C/ 0.1/ 0.01/ 0.001°C
	Sampling Rate	250msec
	Accuracy	0.3% FS
	Excitation Voltage	5 Volts
`Digital Input`
Digital Input 1 Selection		Low Water Level, None
Digital Input 2 Selection		Door Open, Alarm Acknowledge, None
`Serial Communication`
Port		RS-485, Half Duplex
Protocol		Modbus RTU
Baud Rate		9600, 19200, 31250, 38400, 76800
Parity		None, Odd, Even
Data Bits		8
Stop Bits		One(1), Two(2)
`Output Specification`
Output	Relay	5A @ 250 VAC/ 30VDC
	SSR Drive	12 VDC @ 30mA
DC Linear Output/ Retransmission	Current	0-20mA, 4-20mA(500 ohms Max)
	Voltage	0-10Volt (1 Kohms Max)
`Function Specification`
Temperature And Humidity	Alarm	Low / High / Band / Low Deviation/ High Deviation
`General Specification`
Supply Voltage		90 - 270 VAC/ DC (24 VDC Available on Request)
Temperature And Humidity		Operating: 0-50°C Storage: -20° to 75°C 95% RH (Non-condensing)
Dimensions in mm (H x W x D)		96 x 96 x 65

Related products